Nine Piping Solutions

Our stainless steel threaded ball valve is manufactured with Female NPT Threads on either end. As with all NPT threads they are designed to seal when threaded to a pipe. Other ends are available on request, such as Male NPT Threads or stainless steel flanged ball valves.

SS Ball Valve and Stainless Steel 3 way ball valve Supplier. Stainless Steel floating ball valve is a connector used in piping to control the flow of the fluid inside the pipeline without having to disassemble or reassemble the pipes. The ball valves have a ball shaped valve inside a short piece of pipe.

The TC End ball valve consists of a stainless steel body that house a rotating ball. The rotating ball is sealed in the body with PTFE seat that either partially or fully encapsulates the ball. The valve is activated by a stainless steel handle that opens and closes the valve through a quarter turn.

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Stainless Steel Zero Dead Leg Valves are used for complete air-tight separation of liquids and gasses and are specifically used control gummy and dense liquids, very acidic and hazardous substances and chemicals.

The stainless Steel butterfly valve of the current type is Fire safe approved according to ISO 10497 : 2010. It can be actuated using the ISO 5211 mounting pad. The design of the butterfly valve includes a Stainless steel CF8M disc, a Full crossing stem with 10 positions ductile iron handle, with locking device up to DN150.

Stainless Steel Diaphragm Valves are used for complete air-tight separation of liquids from the working mechanism by diaphragm. It is compact manually-operated diaphragm valve which consists of a flow-optimised stainless steel build with several surface finishes, a diaphragm and manual actuator.

Stainless Steel Tc end Butterfly Valve, Butterfly valves are used where space is limited. Unlike gate valves, butterfly valves can be used for throttling or regulating flow as well as in the full open and fully closed position.

Our Stainless Steel Pressure Reducing Valve is suitable for air and water up to 80° C at pressures from 25 Bar inlet. A direct acting valve with NBR seals in Screwed BSP. The pressure gauge supplied with the valve providers accurate readings of the outlet pressure.

Stainless Steel knife gate valve is a type of valve that has a knife like structure inside the body that is seated on the pipeline and is driven by a threaded stem. Nine Piping Solutions a leading manufacturer and supplier of the Stainless Steel Pulp Valve and other types in different sizes, scales and dimensions.

SS 3 Way Ball Valve is a valve that controls fluid flow by the movement of a bored ball inside the valve body. The valve also has 3 ports or openings. The three way system allows the valves to control more complex flows than the 2 way valves. A 3-way valve allows fluid flow to an actuator in one position and exhausts the fluid from it in the other position. Some 3-way valves have a third position that blocks flow at all ports. A double-acting actuator requires a 4-way valve. A 4-way valve pressurizes and exhausts two ports interdependently.

The sight glass is attached to the outside of the tank so that the liquid level can be seen through the glass. The sight glass is marked with graduations to allow the level to be measured. Working Principle: Sanitary sight glass made of standard stainless steel 304.

Stainless Steel Dairy NRV Valve  
Hygienic Non Return Valves are used in systems where the product would flow in just one direction. The valve, which is made of grade 316 stainless steel, operates when the pressure applied on the sprung disc exceeds the opposite force of the spring.

Stainless Steel Fuel Manifold Valve is available in different designs. The 304 grade is a type of austenitic steel with lower carbon content. The lower carbon content in Stainless Steel 304l Manifold Solenoid Valve assists in resisting sensitization corrosion in welded valves.

SS Flush Bottom Valves are special purpose valves used in piping and vessels to drain out any product or slurry left in the pipe or vessel. These valves are most commonly used for dead space free draining or feeding of vessels and pipelines.

Stainless Steel Foot Valves are used in suction side of the pumps to avoid flow reversal from pump to the sump, in order to maintain pump priming. They also prevent entry of foreign body into pump through suction pipe. These valves are suitable for having clear water within the limits specified by IS: 4038 ...

Stainless Steel Strainer Valve is a filtering equipment used to collect solid materials from the flowing liquids. The stainless steel is strong, corrosion resistant and can withstand high temperatures and pressures.

A floating ball valve is a type of valve that uses a ball that floats on top of a liquid to control the flow of the liquid. The ball is connected to a lever that can be used to open and close the valve. When the valve is open, the ball floats, allowing the liquid to flow.

Trunnion ball valves are employed in high-pressure and low-pressure systems. The Trunnion absorbs any additional pressure on the seats and ball in high-pressure settings, allowing the valve to retain its torque. The valve's spring-loaded seats shift toward the ball in low-pressure conditions to create a tight seal.

API 6D defines a double block and bleed valve as a "single valve with two seating surfaces that, in the closed position, provides a seal against pressure from both ends of the valve with a means of vending/bleeding the cavity between the seating surfaces."

The Y type design reduces the flow resistance of the globe valve to a minimum. Seat and stem are angled at approximately 45 degrees, which gives a straighter flow-path at full opening and offers the least resistance to flow. These valves are used for throttling during seasonal or startup operations.

Bellows seal valves are valves employed in piping systems to safeguard against leakage. When selected and installed properly, they minimize the risk of potentially harmful chemicals causing injury or illness to workers and damage to the surrounding environment.

Extended body valves have a welded or threaded connection and are used for tapping of pressure vessels and header lines for vents, drains or takeoff lines and instrumentation. Also available: extended body assemblies for vents, drains, and instrument root valves.

A Forged Steel globe valve is an instrument used to stop and/or control the flow of fluids in a pipeline. It works by halting the flow of a fluid through a pipe. The name globe comes about due to the valve's cylindrical shape. There are usually two halves of the body within the globe valve that are separated by an internal baffle.

A stainless steel check valve is a type of valve that prevents backflow by allowing fluid to flow in only one direction. It consists of a valve body with a hinged flap or disc attached to a stem.

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Cryogenic valves are used to control the flow of fluid through piping. They are often called “cryo” valves because they operate at shallow temperatures below -100°C (-212°F), which allows for greater control over the system's operation. They are relatively inexpensive compared to other types.

Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave. There are various types of check valves used in a wide variety of applications. Check valves are often part of common household items. Although they are available in a wide range of sizes and costs, check valves generally are very small, simple, and inexpensive. Check valves work automatically and most are not controlled by a person or any external control; accordingly, most do not have any valve handle or stem. The bodies (external shells) of most check valves are made of plastic or metal.

Socket weld fittings are a type of pipe fittings used in piping systems to connect pipes and provide a secure and leak free joint These fittings are specifically designed for small diameter pipes and high pressure applications The name socket weld comes from the way the fittings are assembled The pipe is inserted into the socket of the fitting and then fillet welded around the perimeter of the joint