Nine Piping Solutions

Minimum order quantity: 100 Piece

Carbon steel  Sa 106 Gr B/A333 Gr B Butt Weld eccentric reducer fittings are used between two pipes of different diameters that keep pipes stay at same level but having offset center lines. ASTM A860 WPHY 60 Reducer Pipe Fittings are cost-effective and high quality so that it is prevalent by customers.

Minimum order quantity: 100 Piece

Carbon Steel Sa 106 Gr B/A333 Gr B Butt Weld  elbow is a kind of pipe fitting used in the turning of pipelines. Commonly used are 90-degree elbow, 45-degree elbow and 180-degree elbow. Carbon steel elbows are relatively cheaper than stainless steel elbows, so they are used in a large proportion in fluid pipeline construction.

Minimum order quantity: 100 Piece

ASTM A350 LF2 flange is a low-temperature carbon steel flange commonly used in applications requiring resistance to low-temperature environments. These flanges are typically used in the oil and gas industry, where they are used in pipelines, valves & pressure vessels.

Minimum order quantity: 100 Piece

Carbon Steel Sa 106 Gr B/A333 Gr B  Butt welding flange refers to a flange with a neck and a round tube transition and is butt welded to the pipe. It is not easy to be deformed, has good sealing, is widely used, has corresponding rigidity and elasticity requirements, and has a reasonable butt welding thinning transition. 

Minimum order quantity: 100 Piece

Carbon Steel Flange and end flange connectors are basically made of carbon steel. Common standards include ASTM A694, ASTM A105N (SA105N), MSS SP-44, DIN 2533. Accompanying pressure ratings are from class 150 to 2500. Carbon steel is a steel with carbon content up to 2.1% by weight.

Minimum order quantity: 100 Piece

Socket weld fittings are a type of pipe fittings used in piping systems to connect pipes and provide a secure and leak free joint These fittings are specifically designed for small diameter pipes and high pressure applications The name socket weld comes from the way the fittings are assembled The pipe is inserted into the socket of the fitting and then fillet welded around the perimeter of the joint

Minimum order quantity: 100 Piece

Carbon Steel Sa 106 Gr B/A333 Gr b Buttweld Fittings are generally used in the moderate temperature ranges. But they perform well in the high pressure as well as high stressing jobs. Thus, they are highly demanded in the chemical processing and acid manufacturing units for making the pressure vessels safe and secure.

Carbon steel elbow is a kind of pipe fitting used in the turning of pipelines. Commonly used are 90-degree elbow, 45-degree elbow and 180-degree elbow. Carbon steel elbows are relatively cheaper than stainless steel elbows, so they are used in a large proportion in fluid pipeline construction.

WPB 45 degree elbow, also known as return elbows, functioning to change the direction of flow at a 45 degree angle. The most common dimensional standard for 45 degree carbon steel is SME B16. 9, B16. 28 MSS-SP43/75 for sizes ranging from ½” to 72″ (in all Schedules).

Carbon steel 1d elbow is a kind of pipe fitting used in the turning of pipelines. Commonly used are 90-degree elbow, 45-degree elbow and 180-degree elbow. Carbon steel elbows are relatively cheaper than stainless steel elbows, so they are used in a large proportion in fluid pipeline construction.

Carbon steel 5d elbows are metal fittings that change the direction of the pipe on the carbon steel pipe. Connections are threaded and welded. Divided by angle, there are 45 ° and 90 ° 180 ° the three most commonly used, in addition to other engineering needs also include 60 ° and other abnormal angle elbow.

Carbon Steel pipe reducer is used in piping system to change the diameter of pipe. ANSI / ASME B16. 9 Butt weld pipe reducer is an pipe connector or pipe joint that reduces the size of pipe from larger diameter to smaller. The reduction in size is mainly equal to the average smaller and larger pipe diameter.

SA234 WPB Elbow, covers steel pipe fittings such as the CS Elbow A234 WPB which are primarily used in applications for the pressure piping systems. Generally these Elbow A234 Wpc fittings are designed to be used in moderate and high temperature applications .

Minimum order quantity: 100 Piece

ASTM A350 LF2 flange is a low-temperature carbon steel flange commonly used in applications requiring resistance to low-temperature environments. These flanges are typically used in the oil and gas industry, where they are used in pipelines, valves & pressure vessels.

MS Long Bend is the most common used butt weld fittings to change the direction of pipelines. 3D refers to the radius, D is the diameter of pipes. So 3D means a bend which radius is three times the diameter.

Minimum order quantity: 100 Piece

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of  Mild Steel Bsp Reducer A reducer is a component in a piping system that changes the pipe size from a larger to a smaller bore. A reducer allows for a change in pipe size to meet flow requirements or to adapt to existing piping. The length of the reduction is usually equal to the average of the larger and smaller pipe diameters.

The Mild steel weld elbows are used to change the direction of the pipe in different angles. There are long radius and short radius elbows depending on the bending radius of them. The welded as we

There are Ms short and long radius bends. The degree of bending differs as well. The 90 degree short radius bends manufacturer in india are used in pipelines to quickly change the direction by a 90 degree angle. The sr allows for sudden changes of direction and eliminates the need for much space.

Minimum order quantity: 100 Piece

The Mild steel weld elbows are used to change the direction of the pipe in different angles. There are long radius and short radius elbows depending on the bending radius of them. The welded as well as Mild steel threaded fittings are used in various applications.

Minimum order quantity: 100 Piece

Threaded fittings are components used in plumbing piping and other applications to connect and join pipes or tubes together These fittings have threaded ends which allow them to be screwed onto the threaded ends of pipes or tubes creating a secure and leak resistant connection Threaded fittings are commonly used in low pressure and non critical applications

Minimum order quantity: 100 Piece

A butt weld eccentric reducer is a type of pipe fitting used in piping systems to connect two pipes of different diameters It is designed to facilitate the transition of flow between pipes while also allowing for a change in pipe size The term eccentric refers to the fact that the centerline of the two connected pipes is not aligned The key feature of a butt weld eccentric reducer is that it has two openings of different diameters a larger one and a smaller one It is used when there is a need to transition from a larger pipe size to a smaller one or vice versa without creating air or vapor pockets in the piping system The reducer has two ends that are designed for butt welding which involves joining the reducer to the pipes by welding the ends directly This creates a strong and leak resistant connection The eccentric design ensures that the fluid or gas flowing through the piping system maintains a consistent flow rate without any buildup of air or vapor

Minimum order quantity: 100 Piece

 A comprehensive range of MS BSP fittings are available covering Elbows, Tees, Crosses, Unions, Reducing Tees, Nipples, Reducing Sockets, Bushings, Hose Nipples, Welding Nipples, Round Caps, Plugs, Sockets, And Compression Fittings. Available in 304 or 316. BSP 150lbs Pipe Fittings.

Minimum order quantity: 100 Piece

Mild Steel Butt weld end caps are used to terminate vacuum tubing in vacuum piping applications. Butt weld end caps to terminate tubing. 304 Stainless Steel construction. 0.5 to 4 in. vacuum tubing diameters.

Minimum order quantity: 100 Kg

Threaded fittings are components used in plumbing piping and other applications to connect and join pipes or tubes together These fittings have threaded ends which allow them to be screwed onto the threaded ends of pipes or tubes creating a secure and leak resistant connection Threaded fittings are commonly used in low pressure and non critical applications

Minimum order quantity: 100 Piece

A Mild Steel buttweld fitting is a weldable pipe fitting that allows for change of direction of flow, to branch off, reduce pipe size or attach auxiliary equipment.

As opposed to higher carbon steel grades, mild steel is quite malleable, even when cold. Hence, along with having high tensile strength and impact strength properties, it can be easily formed into Mild Steel Fittings. When cold, carbon steel grades that have a higher content of carbon usually shatter or crack under stress. In order to improve its corrosion resistance properties or to make it long-lasting and rustproof, MS Pipe Fittings are often galvanised or coated with the right paint. In addition to the aforementioned properties, what makes Mild Steel Weld Fittings more attractive to many buyers is the fact that this alloy is relatively cheaper than most steels grades. Primarily used to change the direction of the flow, Mild Steel Buttweld Fittings produced under specification ANSI / ASME B16. 9.

Types of Mild Steel Pipe Fittings:

• Elbows: Used to redirect the pipe.
• Tees: Permit spreading of the pipeline into at least two bearings.
• Reducers: Used to interface pipes of various sizes.
• Couplings: Combine two pipes.
• Flanges: Give an association highlight pipes, valves, and hardware.
• Caps and plugs: Seal the finishes of pipes.
• Nipples: Short lengths of pipe utilized for associations.

Minimum order quantity: 100 Piece

Carbon Steel Buttweld Pipe Fittings are the most frequently used pipe fittings. We have huge inventory of Carbon Steel Welded Fittings like elbows, caps, reducers, tees, couplings, unions, etc. which are the best option for pressure vessel and chemical and acid manufacturing areas.

Minimum order quantity: 100 Piece

Carbon Steel Pipe Fittings are the most frequently used pipe fittings. We have huge inventory of Carbon Steel Welded Fittings like elbows, caps, reducers, tees, couplings, unions, etc. which are the best option for pressure vessel and chemical and acid manufacturing areas.

Minimum order quantity: 100 Piece

Carbon Steel Threaded Reducing Couplings are used to connect pipes of two different diameters. Materials: A105 - The standard forged carbon steel piping components for ambient and high temperature / pressure systems.

Minimum order quantity: 100 Piece

Carbon Steel Buttweld fittings comprises of long radius elbow, concentric reducer, eccentric reducers and Tees etc. Butt weld stainless steel and carbon steel fittings are an important part of industrial piping system to change direction, branch off or to mechanically join equipment to the system.

Minimum order quantity: 100 Piece

Carbon steel Bsp reducer is one type of buttweld fittings in material grades ASTM A234 WPB, A860 WPHY 65 and A420 WPL6 for low temperature service. The other butt weld fittings also can be delivered in a short time, such as elbow, tee, cross and cap.

Minimum order quantity: 100 Piece

Carbon steel tee is also a kind of pipe fittings, generally there are two kinds. Equal diameter tee, the diameter at both ends is the same, and the diameter of the branch pipe is different from the other two diameters, which is called reducing tee. The tee is a pipe fitting and a pipe connector.

Minimum order quantity: 100 Piece

"MS Reducing nipple" or "unequal nipple" is used for ping systems that require a modification in pipe dimension. A reducing nipple connects a female fitting with a wider connection to a smaller one.

Minimum order quantity: 100 Piece

Carbon Steel Sa 106 Gr B/A333 Gr B Butt Weld End Caps, usually liquid or gas tight, cover the otherwise open end of a pipe. A Cap attaches to the exterior of a pipe, and may have a solvent-weld socket end or a female-threaded interior. The exterior of an industrial cap may be round, square, rectangular, U- or I-shaped, or may have a handgrip.

Minimum order quantity: 100 Piece

MS BSPP stands for British Standard Pipe Parallel and refers to a type of thread commonly used in plumbing and fluid systems in Europe and other parts of the world It is often referred to as a parallel thread as the threads on the fitting are parallel to each other BSPP fittings are designed for connecting pipes and components with a seal created by tightening the threads together

Minimum order quantity: 100 Piece

Socket weld fittings are a type of pipe fittings used in piping systems to connect pipes and provide a secure and leak free joint These fittings are specifically designed for small diameter pipes and high pressure applications The name socket weld comes from the way the fittings are assembled The pipe is inserted into the socket of the fitting and then fillet welded around the perimeter of the joint

Minimum order quantity: 100 Piece

Socket weld fittings are a type of pipe fittings used in piping systems to connect pipes and provide a secure and leak free joint These fittings are specifically designed for small diameter pipes and high pressure applications The name socket weld comes from the way the fittings are assembled The pipe is inserted into the socket of the fitting and then fillet welded around the perimeter of the joint

Minimum order quantity: 100 Piece

A butt weld concentric reducer is a type of pipe fitting used in piping systems to connect pipes of different diameters It is designed to facilitate a smooth transition between two pipes or tubes with different sizes while maintaining a centerline alignment The reducer gets its name from its shape which tapers down or up in a conical manner Here are some key features and points about butt weld concentric reducers Design and Shape Concentric reducers have a conical shape where the centerlines of the larger and smaller ends are aligned This results in a smooth transition that minimizes turbulence and pressure losses in the fluid flow Butt Weld Connection The term butt weld refers to the welding method used to connect the reducer to the pipes In a butt weld connection the ends of the pipes and the reducer are beveled to create a V groove Then they are welded together along the seam ensuring a strong and leak resistant joint Materials and Sizes Butt weld concentric reducers are available in various materials such as carbon steel stainless steel alloy steel and more to suit different applications and environments They come in a wide range of sizes to accommodate various pipe diameters and flow requirements Usage Concentric reducers are commonly used in industrial piping systems where there is a need to transition between pipe sizes while maintaining smooth fluid flow They find applications in industries like petrochemical oil and gas power generation chemical processing water treatment and more Benefits The main advantage of using a concentric reducer is its ability to maintain a balanced flow and prevent turbulence or eddies in the fluid This can help reduce pressure drops and minimize wear and tear on the system enhancing overall efficiency Installation Proper installation is crucial to ensure the effectiveness of the reducer The pipes and reducer should be properly aligned before welding to avoid misalignments that can lead to leaks or flow disruptions Maintenance Like other components in a piping system reducers require periodic inspection and maintenance to ensure their integrity and functionality This can involve checking for signs of corrosion erosion or any damage that might affect their performance It s important to consult with professionals who are experienced in designing and installing piping systems when choosing and using butt weld concentric reducers Additionally adhering to relevant industry standards and codes is essential to ensure the safety and reliability of the piping system

Minimum order quantity: 100 Piece

LTCS Fittings are commonly used for construction and maintenance applications. They provide excellent mechanical properties and are easy to work with. Their carbon content is between 0.05% and 0.25%, which makes them very malleable and ductile.

Minimum order quantity: 100 Piece

Carbon Steel Stainless Steel npt Fittings used for pipe provides both a mechanical joint along with a hydraulic seal. NPT Threaded Fuel Line Fittings generally has a tapered male and female thread. This male and female thread in the Cast Iron Threaded Fittings is what seals the pipe with Teflon® tape or jointing compound.