Nine Piping Solutions

The Tri-Clover Clamp is used to connect two tri-clover fittings with a gasket in between to seal the connection. Used in the Food & Beverage Industries to make safe sturdy connections. Easy to connect and disconnect. The 1/2" & 3/4" are the same size clamps and so are the 1" & 1.5".

The stainless steel clamp is used to maintain and ensure the tightness of two elements in a cylindrical socket (pipes, hoses, etc.). There are rack, screw, trunnion or ear clamps that can be attached differently. Adjustable, the metal clamp fits all pipe diameters. Resistant to corrosion, fire and temperature variations, it is suitable for all types of industrial maintenance and can be installed in a wet environment. It can be used in the agri-food, petrochemical, aeronautical, medical, automotive, electrical sectors... Depending on the models, the metal collar can be completed with a polyester coating for better corrosion resistance and can be customized by laser in our workshops.

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Stainless Steel Dairy Bend, For Structure Pipe, Size: 3" This is a fitting device which is bent in such a way to produce 90 degree change in the direction of flow of the content in the pipe. An Elbow is used to change the direction in piping and is also sometimes called a "quarter bend".

Stainless Steel TC End Bend An Tc Bend is a pipe fitting which is use as connection points between two lengths of pipes to produce a change in direction of the flow in the pipe usually at 90*,45* The ends may be machined for butt-welding.

Stainless Steel 304 Triclover ClampsA Tri Clamp, which is also referred to as a Tri Clover is a fitting device used in a piping or tubing system. In such systems, the use of Stainless Steel Tri Clover Clamps permits connections to be made across various fluid conveyance systems.

Stainless Steel Pipe Holding Clamp With AssemblyThese are used by various industries for the purpose of holding and supporting pipe & tubes. This dimensionally accurate component is constructed fabricated by our experienced engineers.

Stainless Steel Pipe Holding Clamps are clamps used to clamp pipes or hangers or rods on the walls of the premises in support structure in proper manner.

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Stainless Steel TC End Cross TeeThese types of reducer have inlet and outlet end & align to common center line. These are available in bulk as well as economic order quantity. We have a team of professionals and experienced engineers who are able to create these products in customized designs & sizes.

Stainless Steel TC End Hose Nipple 

These superior quality raw material are worldwide popular for its unique working performance. These are specially designed with grooved and shoulder end in order to allow instant installation, without field preparation.

Stainless Steel Dairy Elbow is an elbow fitting designed for dairy and food processing industries. Made from stainless steel, it ensures hygiene, corrosion resistance, and easy cleaning.

A stainless steel dairy tee, also known as a sanitary tee or hygienic tee, is a type of pipe fitting commonly used in the dairy, food, and beverage industries.

Stainless Steel DIN Unions are used to couple pipes or hangers or rods on the walls of the premises or support structure in proper manner and these unions are designed to suit imperial and metric tube.

Stainless Steel Tri-clamp or Tri-clover Stainless steel Tri-clamp fittings are a sanitary and clamped connection for the hygienic tubes. Often used in commercial brewery and winery applications, they are connections sealed usually by an EPDM seal.

Stainless Steel Tc Clamp SetIt is used to give strong support to the pipe. It is capable to clamp different capacities pipes. Further, these are constructed strongly using stainless steel by keeping the application of these products. So it can be used in high temperature and chemical applications also.

Clevis hangers Clamp are pipe supports that are designed to secure hanging or elevated pipe runs. If you need to suspend piping from elevated beams or the ceiling, clevis hangers are a lifesaver. Generally, clevis hangers include a yoke that connects to your support overhead.

Strength to weight ratio is best in titanium Grade 2 of any corrosion-resistant material. One of the most common Titanium is Grade 2 and it is used for offshore oil installation water pipelines, bleaching plants in the paper industry and condenser tubing, and also used as heat exchangers for some applications. Titanium Grade2 has good density and also a good conductor of thermal conductivity. And the modulus of elasticity is also excellent and the melting point is 3040 Degree Celsius in this grade. It has an ultimate tensile and yield strength. It is available in hot rolled, dull finish, smooth finish, bright cold rolled matte finish and various finishes available.

The SS IDF union comprises of hexagonal nut, weld male, weld liner and nitrile joint ring as standard, all wetted parts are grade 316 stainless steel whilst the nut is 304. The IDF union uses a T-Shaped joint ring to ensure a smooth bore when tightened and a crevice free joint.

Minimum order quantity: 100 Piece

Threaded fittings are components used in plumbing piping and other applications to connect and join pipes or tubes together These fittings have threaded ends which allow them to be screwed onto the threaded ends of pipes or tubes creating a secure and leak resistant connection Threaded fittings are commonly used in low pressure and non critical applications

Manufactured from a cylindrical, thin-walled tube, corrugated stainless steel hoses are made from rolled strips and is welded at the seam. Impressed into this tube is a corrugated annular profile, which helps each convolution to be perpendicular to the center line of the hose.

Stainless Steel Dairy Reducers affix pipes and tubes in a dairy, used for media like milk, water, cleaning solutions, etc. We assure you that are SS 317 Dairy Reducers are hygienic, safe to use and provide the best possible flexibility in piping connections.

Minimum order quantity: 10 Piece

Stainless Steel 304 Tc Clamp. It is a short piece of pipe with a lateral outlet. is used to connect pipelines with a pipe at a right angle with the line. are widely used as pipe fittings.

Long Type STAINLESS STEEL TC FERRULE, For Pharmaceutical/Dairy Sector, Size: 1/4" TO 12" Tri-Clamp Ferrules or TC Ferrules are a flanged fitting used to connect two separate pieces of sanitary tubing. This connection is completed with the use of a clamp and gasket to create a water-tight seal.

SS Dairy Cross Tee   
Leveraging on our enriched industry experience, we are consistently engaged in offering SS Cross Tee. They are used at the end of pipe to join opposing branches. Our flawless engineering technique helps us to develop verity of designs of the product and supply in various industries around the world.

Stainless Steel TC End TeeThese types of reducer have inlet and outlet end & align to common center line. These are available in bulk as well as economic order quantity. We have a team of professionals and experienced engineers who are able to create these products in customized designs & sizes.

TC End Reducer – also referred to as pharma fittings – made of stainless-steel are being used on systems, pipes and vessels to close and secure TC Reducer connections tightly. Therefore, the clamp is positioned around two TC Reducer flanges that have a gasket between them.

Stainless steel dairy and pharma fittings are made from high-quality stainless steel materials, such as 304 or 316 grade stainless steel, which offer excellent resistance to corrosion, chemicals, and high temperatures.

These fittings are made of materials that ensure a sterile condition and preserve sterility when in operation. Stainless steel sanitary fittings are classified according to the three categories of vessels they may be constructed for: pipes, tubing, and hoses.

Stainless Steel SMS Unions are of optimum quality and allows exceptional protection from extreme atmospheric conditions. These unions offer high performance and resist stress and strains. SMS Union uses various material grades including SS 304, 316, 316L / 1.4401, and 1.4301.

Stainless Steel TC End Elbow An Tc elbow is a pipe fitting which is use as connection points between two lengths of pipes to produce a change in direction of the flow in the pipe usually at 90*,45* The ends may be machined for butt-welding.

SS TC Blind Ferrule that is manufactured using top grade raw material. It is the popular name for the International Standard ISO 2852 for stainless steel food grade fittings. Each connection consists of two TC flanges, one gasket and one clamp. The parts can be combined in many ways.

U-Bolt Clamps are U shaped, bent bolts with threads at both ends. A wide clamping range is available, both with carbon steel and stainless steel materials (AISI 304, AISI 316).

Tri-Clamp clamps – also referred to as sanitary clamps – made of stainless-steel are being used on systems, pipes and vessels to close and secure Tri-Clamp connections tightly. Therefore, the clamp is positioned around two Tri-Clamp flanges that have a gasket between them.

Single bolt clamps, also known as worm gear clamps or hose clamps, are among the most common types of clamps used in pipe fittings. They consist of a band made of stainless steel or other durable materials with a screw mechanism that tightens the band around the object it is clamping. These clamps are highly versatile and find applications in various industries, including automotive, plumbing, and HVAC.

Uses of clamps:

• Securing hoses onto fittings, pipes, or tubing.
• Sealing connections in automotive and HVAC systems.
• Fastening flexible ductwork.
• Preventing leaks in water and air systems.