Nine Piping Solutions

These devices are designed to be inserted into a panel cutout from the rear or the front side of the panel. The SS Bulkhead male Connectors are accurately molded of nylon or polypropylene material. The nylon bulkheads are available in black or white while the polypropylene bulkheads are gray.

Hydraulic Fittings are used to connect a hydraulic hose to components like hydraulic cylinders, pipes, tubes,or different types of hydraulic hoses.The different types of hydraulic fittings allow the fluid to flow, change its direction, divert, or mix.

Pneumatic fittings facilitate the transfer of air or gases between different parts of the system, ensuring proper flow and control. They are available in various types, materials, and sizes to accommodate different connection requirements and applications.

The stainless steel reducing unions, for fractional tubes, are used with most of Clean Air Engineering's instrumentation. The reducing unions are designed for high pressure applications in a corrosive environment. Each reducing union we stock, reduces the compression fitting down one size.

The SS back ferrule provides a double seal on stainless steel tube fittings, which creates an advanced and highly reliable seal. For this reason, double ferrules are the preferred choice for high-pressure applications such as a gas pipeline.

Stainless Steel Straight Union is widely demanded in both residential as well as commercial sector. Offered range is manufactured under the strict guidance of adept professionals by making use of topnotch quality material and latest techniques.
Features: Low maintenance.

Stainless Steel Male Branch Tee for Hydraulic Pipe, Size: 1/2-3/4 inch. Branch Tee fittings connect a device to a straight tubing run. Designed for use with air, water or oil, NITRA male branch Tee stainless steel fittings are available in both inch and metric sizes, and can be used with a variety of tubing materials.

SS Female Connector These products are widely used for connection between pipes in engineering, chemical, petrochemical beverage and construction industries.

SS Front Ferrules Achieve leak-tight performance with a robust tube grip and vibration resistance. The remarkable dependability of the Swagelok tube fitting has been proven with over 65 years of success, and has been documented in numerous published test reports, including those performed under extreme conditions.

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Male Run Tee fittings connect a device to a tubing run at a 90 degree turn. Designed for use with air, water or oil, SMAI male run Tee stainless steel fittings are available in both inch and metric sizes, and can be used with a variety of tubing materials.

Stainless Steel Bulkhead Female Connector, For Hydraulic Pipe, Size: 3 inch. We offer Bulkhead female connectors that are widely used to connect a fractional tube to a male NPT thread. These female connectors are available in Stainless steel, carbon steel, brass, monel, haste alloy, inconel, etc.

It is mainly a large hand tight size nut for hands and is used where no wrench is required. Clients can avail our Stainless Steel Pipe Adapter in different sizes and specifications as per their requirements. Features: Has less extracting tolerance.

Bulkhead Unions provide two opposing push-to-connect ports with threaded nuts allowing for installation through a panel or partition. These fittings are composed of 316 stainless steel.

A compression fitting is a fitting used in plumbing and electrical conduit systems to join two tubes or thin-walled pipes together. In instances where two pipes made of dissimilar materials are to be joined (most commonly PVC and copper), the fittings will be made of one or more compatible materials appropriate for the connection. Compression fittings for attaching tubing (piping) commonly have compression Rings, called ferrules or olives in them, and are sometimes referred to as flareless fittings. There are also flare fittings that do not require ferrules/olives.

Compression fittings are used extensively in hydraulic, gas, and water systems to enable the connection of tubing to threaded components like valves and tools. Compression fittings are suited to a variety of applications, such as plumbing systems in confined spaces where copper pipe would be difficult to solder without creating a fire hazard, and extensively in hydraulic industrial applications. A major benefit is that the fittings allow easy disconnection and reconnection.

Minimum order quantity: 100 Piece

The high pressure fittings are used in hydraulic pressure applications where the hoses are flexible and can allow for dynamic movements in the system. The high pressure pipe fittings vary in types as elbows, bends, tees and so on. These fittings are made up of different material types and in different sizes.