Nine Piping Solutions

Minimum order quantity: 100 Piece

17-4 PH flanges are made from a precipitation hardened stainless steel most known for its exceptional strength and its ability to maintain its mechanical properties to 600°F. Compared to 316 stainless steel, 17-4 PH slip on flanges yield strength is up over 4 times greater.

Minimum order quantity: 100 Piece

The 17-4 ph blind flange is basically a flange that does not have a hub or a bored center. Blind flanges have the face thickness of a flange, a matching face type, and similar bolting pattern. Blind flanges can also be used to seal a nozzle opening on a pressure vessel.

Minimum order quantity: 100 Piece

The 17-4ph Buttweld Pipe fittings have a lot of great features, such as high work performance, durability, suitable surface measurements, and more. It is also very flexible and has a high tensile strength, a low yield strength, and good mechanical strength.

Minimum order quantity: 100 Piece

The 17-4ph Buttweld Tube fittings have a lot of great features, such as high work performance, durability, suitable surface measurements, and more. It is also very flexible and has a high tensile strength, a low yield strength, and good mechanical strength.

Minimum order quantity: 100 Piece

A butt weld eccentric reducer is a type of pipe fitting used in piping systems to connect two pipes of different diameters It is designed to facilitate the transition of flow between pipes while also allowing for a change in pipe size The term eccentric refers to the fact that the centerline of the two connected pipes is not aligned The key feature of a butt weld eccentric reducer is that it has two openings of different diameters a larger one and a smaller one It is used when there is a need to transition from a larger pipe size to a smaller one or vice versa without creating air or vapor pockets in the piping system The reducer has two ends that are designed for butt welding which involves joining the reducer to the pipes by welding the ends directly This creates a strong and leak resistant connection The eccentric design ensures that the fluid or gas flowing through the piping system maintains a consistent flow rate without any buildup of air or vapor

Minimum order quantity: 50 Kilogram

Stainless Steel 17-4ph Sheets 
Alloy 17-4PH (UNS S17400), Type 630, is a chromium-nickel-copper precipitation-hardening martensitic stainless steel with an addition of niobium. 17-4PH combines high strength and hardness with good corrosion resistance. The alloy is furnished in the solution annealed condition (Condition A).

Minimum order quantity: 50 Kilogram

Alloy 17-4PH (UNS S17400), Type 630, is a chromium-nickel-copper precipitation-hardening martensitic stainless steel with an addition of niobium. 17-4PH combines high strength and hardness with good corrosion resistance. The alloy is furnished in the solution annealed condition (Condition A).

Minimum order quantity: 100 Kg

17-4 PH Pipes is a martensitic precipitation-hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), good toughness in both base metal and welds, and shorttime, low-temperature heat treatments that ...

Minimum order quantity: 100 Piece

17-4PH stainless steel tube is a martensitic, precipitation-hardening stainless steel that provides an outstanding combination of high strength and hardness along with excellent corrosion resistance. 17-4PH has good fabricating characteristics and can be age hardened by a single step, low temperature treatment.

Minimum order quantity: 100 Piece

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Minimum order quantity: 100 Piece

The 17-4ph Buttweld Cap have a lot of great features, such as high work performance, durability, suitable surface measurements, and more. It is also very flexible and has a high tensile strength, a low yield strength, and good mechanical strength.

Minimum order quantity: 100 Piece

Threaded fittings are components used in plumbing piping and other applications to connect and join pipes or tubes together These fittings have threaded ends which allow them to be screwed onto the threaded ends of pipes or tubes creating a secure and leak resistant connection Threaded fittings are commonly used in low pressure and non critical applications

Minimum order quantity: 100 Piece

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Minimum order quantity: 100 Piece

A butt weld tee also known as a welded tee or a straight tee is a type of pipe fitting used in piping systems to create branching connections It s designed to provide a 90 degree branch from a main pipeline The butt weld in the name refers to the welding method used to attach the tee to the pipes Here s how it works Shape and Design A butt weld tee is shaped like the letter T It has three openings one on the stem of the tee and two on the arms The stem of the tee is welded to the main pipeline while the arms allow for the attachment of other pipes or fittings Welding The butt weld tee is typically attached to the main pipe through a process known as butt welding In butt welding the ends of the tee and the main pipe are beveled to create a groove These beveled ends are then joined together by welding creating a strong and seamless connection Branching Once the butt weld tee is securely welded to the main pipeline it provides a perpendicular branch that can be used to connect another pipe or fitting This branching is useful for creating complex piping systems that require different flows directions or connections Materials and Applications Butt weld tees are commonly made from a variety of materials including metals like carbon steel stainless steel and alloy steel The choice of material depends on the specific requirements of the application such as the type of fluid being transported temperature and pressure conditions Advantages Butt weld tees provide a reliable and strong connection due to the welded joints This makes them suitable for high pressure and high temperature applications The smooth interior of the fittings also helps in minimizing friction and pressure drop in the pipeline

Minimum order quantity: 100 Piece

17-4PH Double Threaded Pipe is a precipitation hardened(PH) martensitic stainless steel consisted of copper and niobium/tantalum. This grade features high strength, hardness and corrosion resistance. Its mechanical properties can be optimized by heat treatment with the compression strength achieving up to 1100-1300 mpa (160-190 ksi).

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Minimum order quantity: 100 Piece

The 17-4ph Buttweld End Cap have a lot of great features, such as high work performance, durability, suitable surface measurements, and more. It is also very flexible and has a high tensile strength, a low yield strength, and good mechanical strength.

Minimum order quantity: 100 Piece

Alloy 17-4PH Reducer Nipple (UNS S17400), Type 630, is a chromium-nickel-copper precipitation-hardening martensitic stainless steel with an addition of niobium. 17-4PH combines high strength and hardness with good corrosion resistance. The alloy is furnished in the solution annealed condition (Condition A).

Minimum order quantity: 100 Piece

17-4 PH Hex Nipple is also known as stainless steel grade 630. The advantage of precipitation hardening steels is that they can be supplied in a “solution treated” condition, which is readily machinable

Minimum order quantity: 100 Piece

17-4PH SS Npt Fitting is a precipitation hardened(PH) martensitic stainless steel consisted of copper and niobium/tantalum. This grade features high strength, hardness and corrosion resistance. Its mechanical properties can be optimized by heat treatment with the compression strength achieving up to 1100-1300 mpa (160-190 ksi).

Minimum order quantity: 100 Piece

Alloy 17-4PH Bsp Reducer (UNS S17400), Type 630, is a chromium-nickel-copper precipitation-hardening martensitic stainless steel with an addition of niobium. 17-4PH combines high strength and hardness with good corrosion resistance. The alloy is furnished in the solution annealed condition (Condition A).

Minimum order quantity: 100 Piece

The 17-4ph Buttweld Elbow have a lot of great features, such as high work performance, durability, suitable surface measurements, and more. It is also very flexible and has a high tensile strength, a low yield strength, and good mechanical strength.

Minimum order quantity: 200 Kg

17-4 ph h1150 round bar is an alloy grade that combines high tensile strength and hardness properties with good resistance to corrosion. The 17-4 ph stainless steel round rod is an alloy that is furnished in Condition A or what many suppliers note as a solution annealed condition. Although the Stainless Steel 13-8 Mo Flat Bar offer many advantageous properties, suppliers and manufacturers do not recommend using these bars temperatures exceeding 572°F or for cryogenic applications.Optimal mechanical ss17-4ph material properties could be achieved by subjecting the bars to an age hardening heat treatments. Heat treating the 17-4 ph h900 round bar to a temperature at a range of 900°F is what imparts the metal with increased strength. Although the corrosion resistance properties of AMS 5643 Steel 17-4 PH Bright Bar rivals that of grade 304 stainless steel in most conditions and its corrosion resistance is generally considered to be superior to the 400 series stainless steel.

Minimum order quantity: 100 Piece

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Minimum order quantity: 100 Piece

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Minimum order quantity: 100 Piece

Threaded fittings are components used in plumbing piping and other applications to connect and join pipes or tubes together These fittings have threaded ends which allow them to be screwed onto the threaded ends of pipes or tubes creating a secure and leak resistant connection Threaded fittings are commonly used in low pressure and non critical applications

Minimum order quantity: 100 Piece

Threaded fittings are components used in plumbing piping and other applications to connect and join pipes or tubes together These fittings have threaded ends which allow them to be screwed onto the threaded ends of pipes or tubes creating a secure and leak resistant connection Threaded fittings are commonly used in low pressure and non critical applications

Minimum order quantity: 100 Piece

Socket weld fittings are a type of pipe fittings used in piping systems to connect pipes and provide a secure and leak free joint These fittings are specifically designed for small diameter pipes and high pressure applications The name socket weld comes from the way the fittings are assembled The pipe is inserted into the socket of the fitting and then fillet welded around the perimeter of the joint

Minimum order quantity: 100 Piece

A butt weld concentric reducer is a type of pipe fitting used in piping systems to connect pipes of different diameters It is designed to facilitate a smooth transition between two pipes or tubes with different sizes while maintaining a centerline alignment The reducer gets its name from its shape which tapers down or up in a conical manner Here are some key features and points about butt weld concentric reducers Design and Shape Concentric reducers have a conical shape where the centerlines of the larger and smaller ends are aligned This results in a smooth transition that minimizes turbulence and pressure losses in the fluid flow Butt Weld Connection The term butt weld refers to the welding method used to connect the reducer to the pipes In a butt weld connection the ends of the pipes and the reducer are beveled to create a V groove Then they are welded together along the seam ensuring a strong and leak resistant joint Materials and Sizes Butt weld concentric reducers are available in various materials such as carbon steel stainless steel alloy steel and more to suit different applications and environments They come in a wide range of sizes to accommodate various pipe diameters and flow requirements Usage Concentric reducers are commonly used in industrial piping systems where there is a need to transition between pipe sizes while maintaining smooth fluid flow They find applications in industries like petrochemical oil and gas power generation chemical processing water treatment and more Benefits The main advantage of using a concentric reducer is its ability to maintain a balanced flow and prevent turbulence or eddies in the fluid This can help reduce pressure drops and minimize wear and tear on the system enhancing overall efficiency Installation Proper installation is crucial to ensure the effectiveness of the reducer The pipes and reducer should be properly aligned before welding to avoid misalignments that can lead to leaks or flow disruptions Maintenance Like other components in a piping system reducers require periodic inspection and maintenance to ensure their integrity and functionality This can involve checking for signs of corrosion erosion or any damage that might affect their performance It s important to consult with professionals who are experienced in designing and installing piping systems when choosing and using butt weld concentric reducers Additionally adhering to relevant industry standards and codes is essential to ensure the safety and reliability of the piping system

Minimum order quantity: 100 Piece

17-4PH Male Female Steel Tee is used in applications requiring high strength, hardness, and corrosion resistance up to 300 °C (600 °F). It is commonly used in the aerospace industry for its high strength, and in marine applications for its corrosion resistance, although it can be susceptible to crevice corrosion in stagnant salt water.

Minimum order quantity: 100 Piece

17-4PH Seamless Fittings is a precipitation hardened(PH) martensitic stainless steel consisted of copper and niobium/tantalum. This grade features high strength, hardness and corrosion resistance. Its mechanical properties can be optimized by heat treatment with the compression strength achieving up to 1100-1300 mpa (160-190 ksi).

Minimum order quantity: 100 Piece

17-4 PH Socket weld elbows, also known as SW elbows, come in two types: 45 degrees and 90 degrees. They are manufactured through forging processes and are available in both long radius (LR) and short radius (SR) models.

Minimum order quantity: 100 Piece

Threaded fittings are components used in plumbing piping and other applications to connect and join pipes or tubes together These fittings have threaded ends which allow them to be screwed onto the threaded ends of pipes or tubes creating a secure and leak resistant connection Threaded fittings are commonly used in low pressure and non critical applications

Minimum order quantity: 100 Piece

We are the exporters of butt weld fittings & butt weld pipe fittings and prepare them in various designs as per the specifications of our clients. Manufactured using quality material and sophisticated machines, our range of buttweld fittings is known for its high quality, zero-defects and superior performance.
We offer butt weld pipe fittings and butt weld fittings in various shapes such as elbow, tee, reducer, return bends, stub-ends, cap, collar, cross, insert and more.
We are exporting in Bahrain, Brazil, Canada, Chile, Czech Republic, Egypt, Indonesia, Italy,Oman, Paland, Qatar, Saudi Arabia, Singapore, Uae, Uk, Usa, Germany.

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.