Nine Piping Solutions

Inconel 600 PIPES is a chromium-nickel alloy designed for use at temperatures up to 2000°F and down to as low as cryogenic levels. The alloy is resistant to reducing environments as well as chloride stress corrosion cracking due to its nickel content and resistant to weaker oxidizing conditions through its chromium content.

Alloy 825 is a Nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. The alloys chemical composition provides exceptional resistance to many corrosive environments.

Threaded fittings are components used in plumbing piping and other applications to connect and join pipes or tubes together These fittings have threaded ends which allow them to be screwed onto the threaded ends of pipes or tubes creating a secure and leak resistant connection Threaded fittings are commonly used in low pressure and non critical applications

Inconel 625 Hex Nipple Apart from Nickel and chromium, the material consists of both molybdenum and a small amount of iron. This chemical composition gives the Inconel 625 Pipe Fittings high mechanical strength. And therefore, these components are often considered for applications involving high pressures as well.

INCONEL pipes and tubes retain all of the key characteristics associated with these nickel alloys. This includes industry-leading corrosion resistance, good strength and excellent high-temperature performance. Many different Grades of INCONEL are used to produce pipes and tubes, and they have various applications.

Inconel Alloy 600 tubing is made from a non-magnetic, nickel-chromium alloy known for its good oxidation resistance at high temperatures. Inconel Alloy UNS N06600 was designed for use from cryogenic to elevated temperatures up to and surpassing 2000 degrees F.

Inconel 601 Pipes is resistant to high-temperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined, and welded.

INCONEL nickel-chromium-iron alloy 601 (UNS N06601/W.Nr. 2.4851) is a general-purpose engineering material for applications that require resistance to heat and corrosion. An outstanding characteristic of INCONEL alloy 601 is its resistance to high- temperature oxidation.

 Inconel 617 Pipes is a nickel chromium cobalt molybdenum alloy, with an addition of Aluminium, which is designed to have a combination of increased strength and stability at elevated temperature, whilst retaining the high temperature corrosion resistance of INCONEL® alloy 601.

INCONEL® alloy 617 (UNS N06617/W.Nr. 2.4663a) is a solid-solution, strengthened, nickel-chromium-cobalt- molybdenum alloy with an exceptional combination of high-temperature strength and oxidation resistance.

Inconel 625® Pipe - UNS N06625A high strength, nickel-based alloy, Inconel 625® exhibits excellent corrosion resistance, oxidation resistance, and toughness. It has very high fatigue strength, is nonmagnetic, and offers an operational temperature range from cryogenic to 2,000°F (1,093°C).

Inconel 625 TUBES is a nickel chromium super alloy pipe that is made up of 58% nickel, 20% chromium, carbon, manganese, silicon, iron, sulfur, aluminum and titanium in the composition. The pipes are highly corrosion resistant.

INCONEL 690 PIPES (UNS N06690/W. Nr. 2.4642) is a high-chromium nickel alloy having excellent resistance to many corrosive aqueous media and high- temperature atmospheres. In addition to its corrosion resistance, alloy 690 has high strength, good metallurgical stability, and favorable fabrication characteristics.

INCONEL 690 TUBES (UNS N06690/W. Nr. 2.4642) is a high-chromium nickel alloy having excellent resistance to many corrosive aqueous media and high- temperature atmospheres. In addition to its corrosion resistance, alloy 690 has high strength, good metallurgical stability, and favorable fabrication characteristics.

Inconel 718 Pipes Sch 40 pipe is a nickel-chromium-molybdenum super alloy designed for resisting a wide range of severely corrosive environments, crevice corrosion and pitting. This nickel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures.

Inconel 718 tube is an age-hardenable nickel-chromium-iron alloy also containing significant amounts of niobium, molybdenum, titanium and aluminum. It combines good corrosion resistance with extremely high strength. Typical applications include heat exchangers and O-rings.

Inconel X-750 Pipes are engineered from a high-nickel alloy with excellent corrosion and oxidation resistance. They conduct heat well and remain ductile even at low temperatures.

Incoloy 800 Pipes is primarily used in applications that can withstand 1100° F temperature. Alloys 800H and 800HT are normally used where in resistance to creep and rupture is required. The chemical balance present in the nickel steel alloy shows excellent resistance to carburization, oxidation and nitriding atmospheres.

Incoloy 800/800H/800HT Tubes are a dual certifiable alloy tubes that is Nickel-chromium-iron alloy based that is resisting oxidation and carburization and high-temperature corrosion. There two alloys chemical composition is identical to the alloy 800 with a high level of carbon content exception.

Nickel alloy 825, also known as Incoloy 825, is a nickel-iron-chromium alloy with additional elements such as molybdenum, copper, and titanium. It is designed to offer excellent resistance to a wide range of corrosive environments, particularly those involving harsh chemicals, acids, and high temperatures.

A butt weld eccentric reducer is a type of pipe fitting used in piping systems to connect two pipes of different diameters It is designed to facilitate the transition of flow between pipes while also allowing for a change in pipe size The term eccentric refers to the fact that the centerline of the two connected pipes is not aligned The key feature of a butt weld eccentric reducer is that it has two openings of different diameters a larger one and a smaller one It is used when there is a need to transition from a larger pipe size to a smaller one or vice versa without creating air or vapor pockets in the piping system The reducer has two ends that are designed for butt welding which involves joining the reducer to the pipes by welding the ends directly This creates a strong and leak resistant connection The eccentric design ensures that the fluid or gas flowing through the piping system maintains a consistent flow rate without any buildup of air or vapor

Inconel 625 Npt Fittings are made up of an nickel alloy that is non – magnetic. It has high toughness and strength. The material is corrosion resistant and oxidation resistant. Navstar Steel is a leading manufacturer and supplier of the products in different types and scales.

Threaded fittings are components used in plumbing piping and other applications to connect and join pipes or tubes together These fittings have threaded ends which allow them to be screwed onto the threaded ends of pipes or tubes creating a secure and leak resistant connection Threaded fittings are commonly used in low pressure and non critical applications

A butt weld eccentric reducer is a type of pipe fitting used in piping systems to connect two pipes of different diameters It is designed to facilitate the transition of flow between pipes while also allowing for a change in pipe size The term eccentric refers to the fact that the centerline of the two connected pipes is not aligned The key feature of a butt weld eccentric reducer is that it has two openings of different diameters a larger one and a smaller one It is used when there is a need to transition from a larger pipe size to a smaller one or vice versa without creating air or vapor pockets in the piping system The reducer has two ends that are designed for butt welding which involves joining the reducer to the pipes by welding the ends directly This creates a strong and leak resistant connection The eccentric design ensures that the fluid or gas flowing through the piping system maintains a consistent flow rate without any buildup of air or vapor

The nickel-chromium alloy used in the ASME SB564 Inconel 600 Buttweld Elbow is a combination of nickel and chromium. The nickel and chromium content in the ASTM B564 Inconel 600 Buttweld Fittings makes them more resistant to oxidation and corrosion.

Alloy 625 Buttweld Elbow, UNS N06625 Tee Manufacturer in India. Inconel 625 Fittings are made up of an nickel alloy that is non – magnetic. It has high toughness and strength. The material is corrosion resistant and oxidation resistant.

A butt weld tee also known as a welded tee or a straight tee is a type of pipe fitting used in piping systems to create branching connections It s designed to provide a 90 degree branch from a main pipeline The butt weld in the name refers to the welding method used to attach the tee to the pipes Here s how it works Shape and Design A butt weld tee is shaped like the letter T It has three openings one on the stem of the tee and two on the arms The stem of the tee is welded to the main pipeline while the arms allow for the attachment of other pipes or fittings Welding The butt weld tee is typically attached to the main pipe through a process known as butt welding In butt welding the ends of the tee and the main pipe are beveled to create a groove These beveled ends are then joined together by welding creating a strong and seamless connection Branching Once the butt weld tee is securely welded to the main pipeline it provides a perpendicular branch that can be used to connect another pipe or fitting This branching is useful for creating complex piping systems that require different flows directions or connections Materials and Applications Butt weld tees are commonly made from a variety of materials including metals like carbon steel stainless steel and alloy steel The choice of material depends on the specific requirements of the application such as the type of fluid being transported temperature and pressure conditions Advantages Butt weld tees provide a reliable and strong connection due to the welded joints This makes them suitable for high pressure and high temperature applications The smooth interior of the fittings also helps in minimizing friction and pressure drop in the pipeline

A butt weld concentric reducer is a type of pipe fitting used in piping systems to connect pipes of different diameters It is designed to facilitate a smooth transition between two pipes or tubes with different sizes while maintaining a centerline alignment The reducer gets its name from its shape which tapers down or up in a conical manner Here are some key features and points about butt weld concentric reducers Design and Shape Concentric reducers have a conical shape where the centerlines of the larger and smaller ends are aligned This results in a smooth transition that minimizes turbulence and pressure losses in the fluid flow Butt Weld Connection The term butt weld refers to the welding method used to connect the reducer to the pipes In a butt weld connection the ends of the pipes and the reducer are beveled to create a V groove Then they are welded together along the seam ensuring a strong and leak resistant joint Materials and Sizes Butt weld concentric reducers are available in various materials such as carbon steel stainless steel alloy steel and more to suit different applications and environments They come in a wide range of sizes to accommodate various pipe diameters and flow requirements Usage Concentric reducers are commonly used in industrial piping systems where there is a need to transition between pipe sizes while maintaining smooth fluid flow They find applications in industries like petrochemical oil and gas power generation chemical processing water treatment and more Benefits The main advantage of using a concentric reducer is its ability to maintain a balanced flow and prevent turbulence or eddies in the fluid This can help reduce pressure drops and minimize wear and tear on the system enhancing overall efficiency Installation Proper installation is crucial to ensure the effectiveness of the reducer The pipes and reducer should be properly aligned before welding to avoid misalignments that can lead to leaks or flow disruptions Maintenance Like other components in a piping system reducers require periodic inspection and maintenance to ensure their integrity and functionality This can involve checking for signs of corrosion erosion or any damage that might affect their performance It s important to consult with professionals who are experienced in designing and installing piping systems when choosing and using butt weld concentric reducers Additionally adhering to relevant industry standards and codes is essential to ensure the safety and reliability of the piping system

Inconel 600 Fittings have high strength, resistance to corrosion, and stress cracking. When Inconel Tube Fittings are exposed to high temperatures they develop a passivating oxide layer that protects the surface from attacks.

Inconel 825 Seamless pipe fittings are made out of seamless pipes as the base raw material. The pipes are first cut to different sizes and shapes as desired by customer specifications and requirements.

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Inconel 800 Male Female Steel Tee The basic difference between male run tee and female run tee is that male run tee connects flared fractional or metric tubes or pipes to female NPT thread while the female run tee connects fractional pipes to male NPT thread.

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

The ASME SB564 Inconel 600 Buttweld Pipe Fittings are non-magnetic and have a high resistance to oxidation and corrosion. The non-magnetic ASME SB564 Inconel Buttweld Fittings are used for applications requiring excellent resistivity in the range of 2000 °F, including at cryogenic to elevated temperatures.

The ASME SB564 Inconel 600 Buttweld Tube Fittings are non-magnetic and have a high resistance to oxidation and corrosion. The non-magnetic ASME SB564 Inconel Buttweld Fittings are used for applications requiring excellent resistivity in the range of 2000 °F, including at cryogenic to elevated temperatures.

Inconel 600 butt weld fittings are made from a nickel-chromium alloy known for its high temperature and corrosion resistance properties. Chemical processing, furnace components, heat treating equipment, etc.

The Inconel 625 Buttweld Pipe Fittings are non-magnetic and have a high resistance to oxidation and corrosion. The non-magnetic Inconel Buttweld Fittings are used for applications requiring excellent resistivity in the range of 2000 °F, including at cryogenic to elevated temperatures.

A butt weld tee also known as a welded tee or a straight tee is a type of pipe fitting used in piping systems to create branching connections It s designed to provide a 90 degree branch from a main pipeline The butt weld in the name refers to the welding method used to attach the tee to the pipes Here s how it works Shape and Design A butt weld tee is shaped like the letter T It has three openings one on the stem of the tee and two on the arms The stem of the tee is welded to the main pipeline while the arms allow for the attachment of other pipes or fittings Welding The butt weld tee is typically attached to the main pipe through a process known as butt welding In butt welding the ends of the tee and the main pipe are beveled to create a groove These beveled ends are then joined together by welding creating a strong and seamless connection Branching Once the butt weld tee is securely welded to the main pipeline it provides a perpendicular branch that can be used to connect another pipe or fitting This branching is useful for creating complex piping systems that require different flows directions or connections Materials and Applications Butt weld tees are commonly made from a variety of materials including metals like carbon steel stainless steel and alloy steel The choice of material depends on the specific requirements of the application such as the type of fluid being transported temperature and pressure conditions Advantages Butt weld tees provide a reliable and strong connection due to the welded joints This makes them suitable for high pressure and high temperature applications The smooth interior of the fittings also helps in minimizing friction and pressure drop in the pipeline

The Inconel 825 Buttweld Pipe Fittings are non-magnetic and have a high resistance to oxidation and corrosion. The non-magnetic Inconel Buttweld Fittings are used for applications requiring excellent resistivity in the range of 2000 °F, including at cryogenic to elevated temperatures.