Nine Piping Solutions

Minimum order quantity: 100 Piece

Copper Nickel 70/30 Buttweld Elbow are readily made with the heat treatment, fabricated, cold worked, and welding process. The addition of the iron and manganese in the fitting offers the extra maintenance strength and great strength to resist the entire general corrosions.

Minimum order quantity: 100 Piece

A butt weld eccentric reducer is a type of pipe fitting used in piping systems to connect two pipes of different diameters It is designed to facilitate the transition of flow between pipes while also allowing for a change in pipe size The term eccentric refers to the fact that the centerline of the two connected pipes is not aligned The key feature of a butt weld eccentric reducer is that it has two openings of different diameters a larger one and a smaller one It is used when there is a need to transition from a larger pipe size to a smaller one or vice versa without creating air or vapor pockets in the piping system The reducer has two ends that are designed for butt welding which involves joining the reducer to the pipes by welding the ends directly This creates a strong and leak resistant connection The eccentric design ensures that the fluid or gas flowing through the piping system maintains a consistent flow rate without any buildup of air or vapor

A butt weld eccentric reducer is a type of pipe fitting used in piping systems to connect two pipes of different diameters It is designed to facilitate the transition of flow between pipes while also allowing for a change in pipe size The term eccentric refers to the fact that the centerline of the two connected pipes is not aligned The key feature of a butt weld eccentric reducer is that it has two openings of different diameters a larger one and a smaller one It is used when there is a need to transition from a larger pipe size to a smaller one or vice versa without creating air or vapor pockets in the piping system The reducer has two ends that are designed for butt welding which involves joining the reducer to the pipes by welding the ends directly This creates a strong and leak resistant connection The eccentric design ensures that the fluid or gas flowing through the piping system maintains a consistent flow rate without any buildup of air or vapor

Cupronickel Sheet is highly resistant to corrosion by salt water, and is therefore used for piping, heat exchangers and condensers in seawater systems, as well as for marine hardware.

Cupronickel Plate is highly resistant to corrosion by salt water, and is therefore used for piping, heat exchangers and condensers in seawater systems, as well as for marine hardware.

Cuni 70/30 Sheet/ Cuni 70/30 Plate are almost entirely resistant to stress corrosion. The addition of small amounts of manganese and iron makes it ideal for use in applications which involves high-velocity polluted seawater. It is known for strength, workability, weldability and formability.

90/10 cupronickel Sheets is a 90% copper, 10% nickel alloy that also contains small but important additions of iron and manganese to enhance overall strength corrosion resistance. This, combined with high ductility and toughness, makes it a popular grade for marine, architectural and industrial applications.

Copper or Cupro Nickel pipes are commonly used in seawater piping due to its complete resistance to barnacles and other marine organisms. Its resistance makes seawater fire fighting systems, desalination water systems, and similar applications much more reliable.

Cu-Ni 70/30 Bright Bar is ductile and strong and it offers superb resistance to erosion and corrosion. It is possible to anneal Cu-Ni DIN 2.0882 Square Bar at temperatures ranging between 1200 and 1500 °F (649 and 816 °C). 70 30 Cu Ni has an excellent cold working capacity and it can be hot formed in an excellent way.

Cu-Ni alloy 90/10 offers superior resistance to general corrosion and marine water attacks. It resists corrosion by fast moving water. It has nominal temperature coefficient of electric resistance. Alloy 90/10 prevents stress corrosion cracking and pitting and crevice corrosion.

These bars have enhanced resistance to corrosive media in seawater. The versatile grade of 90/10 Copper Nickel Rounds is manufactured with a superior composition of 90% chromium and 10% nickel. These modules have enhanced tolerance to general corrosion while showing superior ductility and toughness.

The Copper Nickel Rod are made with best quality materials and known for their features like high tensile strength, strong, corrosion to resistance, efficient functionality. These Rods are traded to our clients all across the world. These metal rods are used in different industries like cement, steel, refineries.

Copper Nickel 90/10 Round Bars
The qualities it possesses are high tensile strength, good dimensional accuracy, excellent surface finishes, flexibility, durability, rugged construction, longevity etc. It is having a greater ability to withstand heavy loads and also at high-temperature atmosphere.

Copper Nickel 70/30 pipe is an alloy piping material that combines copper and nickel. It offers superior corrosion resistance, making it highly suitable for use in salty or acidic environments due to its excellent resistance to sulfuric acid, saline water and acids formed by other chemicals.

Copper Nickel 70/30 Tubesis a 70% copper, 30% nickel alloy with additions of iron and manganese. These elemental additions make it somewhat more resistant to corrosion and erosion and with slightly improved strength level than 90/10, making it suitable for more demanding applications.

Cu-Ni 90/10 plates are composed with many properties. They are highly ductile and offers good resistant to corrosion. These properties make it useful in marine engineering applications and various gas structure plants.

Minimum order quantity: 100 Piece

Copper Nickel Forged Fittings are forging copper-nickel alloys to produce high-quality and durable fittings. These fittings are commonly used in high-pressure and high-temperature marine, oil, gas & chemical applications.

Minimum order quantity: 100 Piece

Type Cu Ni 70/30 Threaded Flanges are designed for low pressure, resistance to bio-fouling, non-cyclic applications and also in applications where welding is hazardous. These are widely demanded as pipe flanges used in different industrial applications.

Minimum order quantity: 100 Piece

90/10 Copper Nickel Flanges have high yield and tensile strengths and are corrosion resistant to sea water and acidic media. R.C. Metal Corporation is a leading supplier and manufacturer of the Cupro nickel 90/10 Slip On Flanges and other types in various dimensions and production types.

Minimum order quantity: 100 Piece

Copper nickel flanges attach by welding the pipe to the neck of the flange. This transfers stress from the flange to the pipe instead. It also reduces the stress concentration from the base of the hub. Weld neck flanges are often used for applications where high pressure is a factor.

Minimum order quantity: 100 Piece

Copper Nickel Lap Joint Flange is used directly by sliding it over the pipe. It is used in applications that require to be dismantled frequently. On the other hand, a Cupro Nickel Blind Flange is used to block off the connection from one side either permanently or temporarily.

Minimum order quantity: 100 Piece

Copper Nickel Lateral Tee has high demands and has excellent features adding to its qualities. Copper nickel are strengthening elements, and are composed in desired quantities and proportions which results in higher resistance of the products to corrosion and many more agents.

Minimum order quantity: 100 Piece

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Minimum order quantity: 100 Piece

The material has high strength with 20ksi minimum yield strength and 50ksi minimum tensile strength. The Cupro Nickel 70/30 Flange is a type of flanges that has welded neck that allows for gripping the pipe into place while welding.

Minimum order quantity: 100 Piece

These Cu-Ni 70/30 Butt Weld Pipe Fittings (UNS C71500) is readily cold worked, fabricated and welded without any special material considerations. Cupro Nickel 70/30 Tee Butt Weld Pipe Fittings likewise have imperative additions of iron and manganese which are important to keep up great erosion obstruction.

Minimum order quantity: 100 Piece

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Minimum order quantity: 100 Piece

Cupro Nickel 90 / 10 Tee Butt Weld Pipe Fittings are often used in pumps, valves, sheathing and fittings for ship hulls. Copper Nickel 90 / 10 Reducer is a 90 % copper, 10 % nickel alloy that also contains small but important additions of iron and manganese to enhance overall strength corrosion resistance.

Minimum order quantity: 100 Kg

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Minimum order quantity: 100 Piece

Copper Nickel Bling Flange with 1 2 Npt has a solid middle section with bolt holes evenly distributed around it. This Copper Nickel Blind Flange can be used to close or cover piping systems, vessels, tanks or valves.

Minimum order quantity: 100 Piece

Copper Nickel Reducer, also called Reducing Joints, is a popular and reliable pipe fitting made from high-grade CuNi 90/10 (C70600) or CuNi 70/30 (C71500) material. It is known for excellent corrosion resistance, oxidation resistance, superior tensile strength, and long service lifespan.

Minimum order quantity: 100 Piece

Copper Nickel Buttweld Fittings 
ASTM B122 Copper Nickel Pipe Fittings are known to deliver exceptional performance and are generally developed for meeting the demands. We offer a broad range of ASTM B122 Cupro Nickel Buttweld Pipe Fittings through a worldwide network of stock-keeping branches.

Minimum order quantity: 100 Piece

Nine Piping Solutions is One of the Leading Manufacturer, Exporter, Stockist & Supplier of:Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Titanium Alloys & High Nickel Alloys in the form of Pipes, Tubes, Butt Weld Pipe Fittings, Forged Fittings, Dairy Pharma Fittings, Sanitary Fittings, Tri Clover Fittings, Flanges, Tube Fittings, Ferrule Fittings, Compression Fittings, Olets, Fasteners, Sheets, Plates, Coils, Shims, Bars, IBR Material, and all other types of Ferrous & Non Ferrous Metal Products.

Cupro Nickel 70/30 Forged Fittings are manufactured based on governing theory mentioned in the standards like ASTM B122, ASTM B 171, B466, B467, and ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799.

A Cupro Nickel 70/30 plate has many advantages. This alloy is an excellent choice for high-temperature applications and offers a high level of corrosion resistance. In addition to high strength, it also has good machinability and is suitable for hot-working processes.

Minimum order quantity: 100 Piece

These copper nickel Fitting alloys prove to have very good resistance to seawater, brine water, organic compounds, neutral and alkaline salts, diluted non-oxidizing acids, and more. The copper nickel alloys are most commonly used in seawater environments because of the anti-fouling.

Minimum order quantity: 100 Kg

Copper Nickel Tubes are used in cryogenic applications, which combine good ductility retention and thermal conductivity at shallow temperatures. Cu-Ni Pipes are advantageous for cryogenic plants' low-temperature processing, storage equipment, and heat exchangers.

Minimum order quantity: 100 Piece

Cupro-nickel Bspp Fittings is a 90 % copper, 10 % nickel alloy that also contains small but important additions of iron and manganese to enhance overall strength corrosion resistance.

Minimum order quantity: 100 Piece

Copper Nickel Double Threaded Pipes are wrought alloys with a mixture of copper and nickel. It has excellent corrosion resistance and superior strength and machinability. Copper Nickel Pipes are particularly well suited for marine applications.

Minimum order quantity: 100 Piece

Cu-Ni 90/10 Forged Fittings is right for tough applications as it also has features like crevice corrosion resistance, pitting resistance, and stress corrosion cracking resistance. Even in slowly moving saltwater, there are a limited number of possible sites for pitting attack due to its befouling resistance.

Minimum order quantity: 100 Piece

Threaded fittings are components used in plumbing piping and other applications to connect and join pipes or tubes together These fittings have threaded ends which allow them to be screwed onto the threaded ends of pipes or tubes creating a secure and leak resistant connection Threaded fittings are commonly used in low pressure and non critical applications